======================================== |vector_edition| 7.x Broadcom wifi howto ======================================== Version 7.1 needs a little tweaking to get broadcom going. instructions are here http://vlcore.vectorlinux.com:10080/m0e.lnx/sta-builder The following applies to both 7.1 AND 7.2 Blacklist modules ================= 1. ``nano /etc/modprobe.d/blacklist.conf`` 2. Add these lines to your ``blacklist.conf`` file :: blacklist b43 blacklist ssb blacklist bcma blacklist bcm43xx blacklist bcm80211 blacklist brcmsmac 3. Reboot. You should now have module wl loaded. Verify with ``lsmod | grep wl`` 4. Done